Radium Releases Billet Catch Cans & Coolant Expansion Tank Kits for Ford Mustangs

 Radium Releases Billet Catch Cans & Coolant Expansion Tank Kits for Ford Mustangs

Radium Engineering has released billet PCV and Crankcase Catch Can kits and bolt-on Coolant Expansion Tank kits for 2011+ Ford Mustang owners! Catch Can kits for the PCV and crankcase are available individually or together for the ultimate prevention of oil buildup along the intake tract. Radium's aluminum Coolant Expansion Tank is designed to de-aerate hot coolant coming from the cylinder head for more efficient cooling in extreme conditions. Coolant Expansion Tanks are available for 2011-up GT, V6, EcoBoost and Shelby GT350 Ford Mustangs.

In addition to these new products, Radium offers a Ford Coyote Fuel Rail Kit, and has more performance solutions for Ford vehicles currently in development!

 

 

Radium's catch cans use a closed-loop design that does not vent to atmosphere, making them emissions and track legal. They are available for the PCV valve and crankcase vent and are sold individually or together as a complete system.

 

 

Radium's Mustang Catch Cans route clean, filtered air back into the engine, allowing it to be burned and promote negative crankcase pressure for optimal performance. This design also prevents unwanted oil vapors from entering into the vehicle's cabin (learn more about the advantages of catch cans here). They are ideal for all stock or modified Coyote Engines. No permanent modifications to the vehicle are required for installation.

Unlike many catch cans on the market, Radium Engineering's catch cans feature an integrated oil separator that accelerates oil condensation, cleaning PCV gases and reducing oil build-up on the inside of the intake tract and intake manifold. The stainless steel filtration media used to separate the oil is cleanable and re-usable. Oil and other contaminants are collected in the catch can and can be easily drained.

Radium's Catch Can kits for Coyote-equipped Mustang include an 8 oz. machined 6061 billet aluminum can, laser-cut anodized mounting brackets, all hoses, fittings, clamps and stainless steel hardware. They feature two-piece construction with a removable bottom so they can be easily serviced. All Radium catch cans are black anodized and laser engraved. All ports are O-ring sealed.

  • Effectively raises the octane and increases engine performance through cleaner inlet air
  • Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc.
  • Lowers hydrocarbon emissions

 

 

Radium's Coolant Expansion Tank kits fit all 2011+ Ford Mustangs including the 5.0L Coyote, V6, EcoBoost and the Shelby GT350, and it performs the same function as the factory plastic coolant tank.

The Radium Engineering coolant tank is CNC machined from aluminum for a robust design that can handle extreme heat cycling. This product is more than a simple overflow tank; it is part of the pressurized coolant system and features an internal swirl design that accelerates hot pressurized coolant from the cylinder head to aid in de-aerating it. This tank replaces the plastic factory overflow tank at the front of the engine bay and the specially designed mounting bracket uses the OEM mounting points. No permanent modifications to the vehicle are required.
 

 

The Coolant Expansion Tank's low-profile design provides extra room in the engine bay for aftermarket forced induction piping or other engine modifications. The tank's internal design features two chambers that have cross-over passages at the top and bottom. A 1.5BAR (21.8 PSI) Radium radiator cap is recommended. A different cap may be used but it must be a Type A cap (click here for more info), as the factory coolant tank cap cannot be reused.

 

FORD MUSTANG CATCH CAN KIT APPLICATIONS

Part NumberCatch Can TypeYearMakeModel
20-0267 PCV2011-up Ford Mustang GT, GT350
20-0279Crankcase2011-2014Ford Mustang GT
20-0287Crankcase2015-up Ford Mustang GT
20-0324Dual2011-2014  Ford Mustang GT
20-0235Dual2015-upFord Mustang GT

 

FORD MUSTANG COOLANT EXPANSION TANK KIT APPLICATIONS

Part NumberYearMakeModel
20-02852011-2014 Ford    Mustang GT, V6, EcoBoost, GT350
20-02862015-upFord    Mustang GT, V6, EcoBoost, GT350

 

 

 

About Radium Engineering

For more information, email info@radiumauto.com or visit the company's dealer finder at www.radiumauto.com.
 
Radium Engineering is located in Clackamas, Oregon. The company designs and manufactures innovative universal performance solutions including fuel surge tanks, catch cans and fuel pressure regulators, and application specific performance solutions ranging from fuel delivery to turbo systems. Radium-End Fuel Starvation.

 

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*