Radium Direct Mount Adjustable Fuel Pressure Regulator (DMR) Simplifies Fuel System Designs, Fits in Tight Spaces!
Radium Engineering has done it again, delivering a unique adjustable fuel pressure regulator design with the introduction of its universal Direct Mount Regulator (DMR). The compact design of the Radium DMR requires only 2.5″ of clearance space at the end of a fuel rail, making it the perfect solution for applications with close tolerances or in engine bays that do not have accessible space for remote mounting. Its unique swivel inlet fitting adapts directly to any fuel rail with a -8AN ORB port which eliminates the need for external mounting and additional fuel lines. This makes the DMR a perfect solution for simplifying the plumbing of a high-flow fuel injection system set up.
The DMR uses the same internals as the popular Radium Engineering MPR (Multi-Pump Regulator), with O-ring sealed ports (including the return port) and interchangeable return orifices that match the regulator to the pump flow. Two opposing -6AN ORB ports are machined into the regulator and either port can be used for the return line using the included fittings. Fuel pressure is adjusted by turning the preloaded set screw on the top of the DMR. The DMR can be clocked 360 degrees when mounting to accommodate most fuel system designs.
BOOST READY DESIGN SUPPORTS OVER 1400LPH (369GPH)
The Radium DMR has a 1:1 vacuum reference for boosted vehicles and its high flow design is tested to regulate over 1,400 liters per hour of fuel flow. Interchangeable return orifices allow it to be used with practically any horsepower output of a fuel injected system. The DMR is fully anodized for compatibility with ethanol blended fuels and all types of gasoline.
Direct Mount Regulator (DMR) Features:
- Adapts directly to the fuel rail to simplify fuel system set up and fit in tight spaces
- Validated to regulate fuel flow on systems delivering over 1,400lph!
- 1:1 vacuum reference for forced induction engines
- Interchangeable return orifices make it ideal for virtually any pump flow requirement
- Compatible with Ethanol blended fuels and all types of gasoline
- Available with black or Radium Green anodized top
- Machined billet aluminum construction
- O-ring sealed inlet and return ports
- Fittings included (-6AN ORB (9/16″-18) plug, -6AN ORB (9/16″-18) to 6AN male, -8AN ORB inlet swivel fitting)
- Stainless steel hardware included
For more information on the new Direct Mount Adjustable Fuel Pressure Regulator (DMR) visit:
