AEM Electronics – Water/Methanol Injection Monitor

AEM Electronics Water/Methanol Injection Monitor

AEM’S WATER/METHANOL INJECTION MONITOR SYSTEM 

 

AEM Performance Electronics’ new Injection Monitor System (part #30-3020), the most advanced, easy to use water/methanol injection safety system on the market is now available!

Water/methanol injection users now have the sophisticated safety system they’ve always needed in an easy to use package.  Unlike most competitor systems that only check flow at a single point, AEM’s Injection Monitor is a smart system that monitors the entire flow curve.  Flow versus injection rate data is continuously collected and any deviation away from an acceptable baseline flow curve will trigger an alarm output.  This output can be used to reduce boost, pull timing, switch maps, or any other function to protect an engine from harmful detonation in the event there is an unsafe operating condition.

“We designed our Injection Monitor to truly be the most effective and complete water/methanol injection safety device available,” said AEM Product Development Engineer Nathan Stewart.  “AEM is strongly committed to the water/methanol injection market and we will continue to launch new and innovative technology to benefit users of these types of products.”

The AEM Injection Monitor features a wide variety of innovative features including PC configuration software with USB connectivity, an “Auto Set” feature that automatically provides a best-suggested baseline configuration, a high-tech analog display gauge with user adjustable backlighting that can be flashed when an alarm is triggered, and an internal data logger that records injection and alarm status data.

 

AEM Electronics Water/Methanol Injection Monitor

 

KEY FEATURES

* Monitors the entire injection curve and its relationship to injection progression.
* Can be used with any injection system with ¼” OD tubing.
* Tunable PC based software with USB connectivity.
* Injection Monitor software with built in Auto Set Limit feature that automatically suggests best alarm configuration.
* One low side (ground) driver and one high side (+12v) driver can be configured to turn on or off during an alarm condition.
* Internal data logger records all injection flow and alarm status data.
* High-tech analog style gauge is easily readable and user programmable for either 0-500 cc/min or 0-1000 cc/min flow ranges with interchangeable black & white face plates and black & silver bezels.
* Gauge alarm and backlighting color is fully user adjustable through software to match virtually any OEM dash or desired color.
* Built in warning lights inform the user of an alarm trigger.
* Injection Monitor software offers a live gauge view that displays both injection percentage and low.
* Fully adjustable alarm delay and alarm reset period.
* 0-5v analog output for use with data loggers and virtually any engine management system, such as the AEM EMS or F/IC.
* Auxiliary input for use with AEM Water/Methanol Injection “Boost Safe” feature triggers alarm output in the event there is a system readiness issue (open circuit, short circuit, low fluid level, etc.)
* High-quality precision flow sensor included.
* Gauge backlight is user defined to dim on either a +12v or ground signal

Tunable PC based software with USB connectivity.

AEM Electronics Water/Methanol Injection Monitor

For more information please visit:

www.aemelectronics.com

 

CLICK HERE to read our evaluation of AEM’s Water/Methanol Injection Kit

 AEM water methanol injection system

 

  

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*