AEM Releases Powersports Plug & Play Fuel/Ignition Controller-4 (F/IC-4) for Turbocharged Suzuki Hayabusas!
Got a boosted ’Busa? Can’t optimize the tune? You need this. AEM's Powersports Plug & Play F/IC-4 for 1999-’01 (GSXR 1300, PN#30-1921) and 2001-’04 (GSXR 1000, PN#30-1922) Hayabusas with aftermarket turbo systems. The Powersports F/IC-4 is a PC-programmable, piggyback controller that allows users to retard timing and add/subtract fuel, making it the perfect solution for boosted applications that do not need standalone engine management!
WHY YOU WANT ONE
Optimization of fuel and ignition curves to maximize overall response, performance, ride-ability and reliability are critical to getting the most from your Hayabusa’s turbo system. AEM’s Powersports Plug & Play F/IC-4 accomplishes the above tasks, and eliminates the need for a more costly standalone engine management system by working in parallel with the factory ECU via a supplied wiring harness. It allows you to retard timing and add or subtract fuel, and works with either the factory fuel injectors or larger, aftermarket injectors by reducing injector pulse-width. We know of no other fuel/ignition controller that can currently accomplish this. Alternatively, the Powersports F/IC-4 can tap into the factory injector signal to drive four (4) additional injectors.
The Powersports Plug & Play F/IC-4 comes with an onboard MAP sensor that is used for boosted fueling and timing, as well as “clamping” the factory MAP sensor. The unit integrates seamlessly on motorcycles with CAN-BUS to retain full functionality of the dashboard and other network components such as drive by wire throttle controls. It also includes 2MB of internal datalogging.
MORE REASONS YOU WANT ONE
AEM’s engineers have simplified installation of the Powersports Plug & Play F/IC-4 by including a plug & play harness to integrate with the factory ECU, a start-up calibration and a quick-start guide to simplify the tuning process. The software is Windows™-based for ease of use. The FIC is programmed using a USB interface for easy real time tuning or bench top tuning.
STILL NOT CONVINCED?
The Powersports F/IC-4 is housed in a water- and shock-proof enclosure with a weatherproof 24-pin connector. It can be mounted virtually anywhere.
BUY THIS…OR WE’LL FIND YOU
Just kidding. But with all of the included Powersports F/IC-4’s features to get your turbocharged Hayabusa running its best; the ability to hide boost from the factory ECU, increase injector size or add additional injectors and retain complete functionality of CAN-BUS channels, we are positive that AEM’s Powersports F/IC-4 will extract the most power and deliver the best ride-ability from your turbo and other modifications.
Powersports Plug & Play F/IC Features:
- Runs in conjunction with factory ECU
- Allows for use of the factory drive by wire
- Plugs Directly Into the Factory Harness – No Rewiring Necessary!
- Includes Start-Up Calibrations
- MAP Output to “Hide” Boost from Factory ECU
- CAN-BUS not affected – Retains Full Dashboard Functionality
- Ability to Decrease Injector Pulse-Width which Allows for Larger Aftermarket Injectors while maintaining Proper AFR
- 2MB Internal Datalogging
- Water & Shock Resistant Enclosure – Mounts Almost Anywhere
AEM’s Powersports Fuel/Ignition Controller-4 (F/IC-4) is legal in California only for racing vehicles which may never be used upon a highway.
WARNING! Use this system with EXTREME caution! The AEM F/IC System allows for total flexibility in engine tuning, however misuse of this product can lead to major engine/vehicle damage. If you are not well versed in engine dynamics and the tuning of management systems or are not PC literate, please do not attempt installation/tuning of this product. For technical assistance, please visit our forum or visit our dealer locator for a Factory Trained tuner near you. AEM holds no responsibility for any engine damage that results from the misuse of this product!
MORE INFO
Please visit www.aemelectronics.com or call (310) 484-2322 for more information or to find an authorized AEM Electronics dealer or Factory-Trained tuner.
ABOUT AEM
Advanced Engine Management’s performance electronics are Engineered to Outperform. The company designs, manufactures and assembles engine management systems, wideband air/fuel systems, water/methanol injection systems, performance gauges, boost controllers, ignition components, fuel delivery components and adjustable cam gears at its corporate headquarters in Hawthorne, CA.
