Project VA WRX: Upgrading the Brakes with Stoptech Part 2 – Getting it Done!


After the baseline brake testing was done with the stock brakes, the crew at Stoptech installed the upgraded brake kits right at the test venue.
The brake kits install easily as a direct bolt on even under field conditions.  If the rotors look a little worn, it is from the kit's initial testing on Stoptech's brake dyno. 
The big Stoptech front brakes in place.
Next, it was time to change the rear brakes.
Like the front brakes the rear brakes installed in just a few minutes. 
The rear brakes look a lot better than stock!   The wear on our kit is from testing and rotor bedding in on the brake dyno.

Leave a Reply

Your email address will not be published. Required fields are marked *