Project GD STI, Getting Ready For the Engine Swap
In our previous articles, we covered the build-up of our EJ257 engine collaboration with IAG Performance. Now we have been collecting a bunch of parts to make our installation go…
Posts by tag
Motor Mounts
7 posts
New Motor Mounts for Project DC2 Integra!
Our Project DC2 Integra had developed a clunking noise whenever the clutch was let out or if the throttle was modulated. This was really annoying, especially at low speed. We traced…
Project SC300 Road Racer: Part 20 – Getting Shift Done
When we last left Project SC300 we had figured out just how much we could drop the motor, and cleaned up the transmission tunnel to accommodate the shifter. Now it…
Project SC300 Road Racer: Part 19 – Achieving Release, Mounting Problems
In the last installment of Project SC300 we had just attempted to bolt on the Quick Time 2JZ-T56 adapter bellhousing to the engine. After some careful massaging of the transmission…
Project SC300 Road Racer: Part 18 – We have transmission!
Our last outing with Project SC300 did not leave us all that happy. After much hard work completely rewiring the car, fabricating lots of odds and ends, and countless hours…
Building the FR-S FA20 with Stay Crushing: Installing the Engine and Making Big Power!
Building the FR-S FA20 with Stay Crushing: Installing the Engine and Making Big Power! by Mike Kojima If you have been following our story, we are now ready to install the engine…
Building the FR-S FA20 engine with Stay Crushing!
Building the FR-S FA20 engine with Stay Crushing! by Mike Kojima Our friend Robert Kochis doesn't seem like a typical MotoIQ reader. He is a cool guy, not a nerd. He vapes…