Getting the Most From 91 Octane Pump Gas with a Honda K Motor, Part Four
In our last articles, we gathered the parts and assembled out low octane Honda K motors for our sleeper DC5 RSX Type S project car. Our engine was intended to…
Posts by tag
Eimer Engineering
9 posts
Rapid Designing and Testing Suspension With 3D Printing Part 2
In our last story, we were redesigning the steering knuckle/upright for the 2019 season on Dai Yoshihara’s Turn 14 Formula Drift BR-Z. Our design goals were to keep the tires…
Designing Suspension with 3D Printing
Drift cars with their extreme steering angles are pretty difficult to design suspension for. A lot of things must be considered because geometry that works well on a regular car…
Dai Yoshihara’s 2018 Formula Drift Rebuild Conclusion
Dai Yoshihara's 2018 Formula Drift Rebuild Conclusion by Mike Kojima So if you have been following along with our mini-series on what an end of season refresh on Pro…
Dai Yoshihara’s 2018 Formula Drift Rebuild Continued!
Dai Yoshihara's 2018 Formula Drift Rebuild Continued! by Mike Kojima So the rush to freshen Dai's car for 2018 by Eimer Engineering continues. In our last story, the chassis had gotten…
Dai Yoshihara’s 2018 Formula Drift Rebuild
Dai Yoshihara’s 2018 Formula Drift Rebuild by Mike Kojima After 3 years of Formula Drift competition, our team had pretty much developed the BRZ chassis to where we were satisfied with…
Building the Naturally Aspirated Honda K Engine: Part 4- Burns Header and Tuning
Building the Naturally Aspirated Honda K Engine! Part 4- Burns Header and Tuning By Mike Kojima If you have been following our previous articles of our build of the naturally aspirated K24, we…
Fabricating Turbo Headers and Exhaust Systems with Eimer Engineering and Burns Stainless
Fabricating Turbo Headers and Exhaust Systems with Eimer Engineering and Burns Stainless by Mike Kojima How do you make a good turbo system even better? We did it by enlisting…
Project V8 RX-7: Part 17 – Eimer Engineering Arms, Wheel Spacers and the Hunt for Perfect Stance
Project V8 RX-7: Part 17 – Eimer Engineering Arms, Wheel Spacers and the Hunt for Perfect Stance by Mike Kojima In our last Project V8 RX-7 article, we left you with photos…