Project NSX: Part 22 – DBW Intake Manifold
Now that our Drive-By-Wire pedal and Motec ECU are installed, we turned our attention to simplifying and adapting an 80mm Ford Mustang DBW throttle body to the original intake manifold.…
Posts by tag
Throttle body
9 posts
IAG’s New Easy Plug and Play Drive By Wire Big Throttle Body for the EJ257.
We previously had gotten an IAG Performance big throttle body for Project STI, although it was a nice piece it was not exactly user-friendly. You had to get the drive-by-wire…
Freeing up the EJ257 Intake Flow with Process West and IAG
We were planning to run a Cosworth intake manifold on Project STI’s IAG motor but we were unable to find one for a decent price as they have been discontinued…
Project 987.2 Cayman S: Getting More Out of the Engine to Chase the GT4 Part 3
In our last article we focused on freeing up the exhaust side of our 9A1 engine. Now we are working on freeing up the intake side of the engine for…
BEST OF 2019: Project 987.2 Cayman S: Getting More Out of the Engine to Chase the GT4 Part 1
Previously we have been working on Project 987.2 Caymans Suspension and Brakes to get them up to Cup Car standards. With that work being completed we are now going to…
Getting More Power From the 4G63 With Link Engine Managment
Photography by Vincent Soto Now that we have accumulated all of the cool parts for our Project Evo IX it is time to start getting it all together to integrate…
Getting More From the 4G63, Project Evo IX
After sitting for several years, we are getting off of our asses and are working on getting a decent bump in power on Project Mitsubishi Evo IX. In our last…
Tuning the Ford Mustang Coyote Engine
Tuning the Coyote engine in our S197 Ford Mustang has proven to be a bit more difficult than we originally anticipated, but hopefully we found a solution thanks to Church…
Project 5.0 Mustang: Improving the Breathing With Ford Racing and Cooling with CSF
Project 5.0 Mustang: Improving the Breathing With Ford Racing and Cooling with CSF by Mike Kojima In previous installments of our Project Mustang we had installed most of the common…