The GT3R front diffuser was supplemented with a larger front splitter made of carbon with a Jabroc rub strip. The cars aero mods were pretty mild compared to most Pikes Peak cars and sort of reminiscent of the rules mandated minimal aero that we developed for the Eneos car.
The GT3R bodywork sits on the ground waiting to be fitted.
Here is the interior of the car altogether with a Racetech containment seat and Sabelt harnesses.
The Race Tech seat offers excellent support and driver protection.
Here is the car’s front bay all assembled.
KW Cup Car 3-way struts have their remote reservoirs mounted for easy access to the compression adjusters. The duct to the left feeds the front brakes through a NACA duct in the hood. The factory Cup Car roll cage ties into the front strut towers.
14 comments
The power steering pump is actually a generic TRW item.
No need to buy the $$$ Porsche Motorsport item if You wish to adapt it in any other car.
I know, I have installed a few.
Opel/Vauxhall part no 93179569.
Good to know, does it look to be the exact same part?
Looks to be, yes.
Works great, basically needs two wires to run.
OEM Numbers: 5948009, 5948001, 5948127, 5948128, 93188235, 93188236, 13105726, 24436412.
TRW part no: JER100 or JER108 (difference is in connectors, which are anyway useless for a custom install)
Thank you!
Twist is right about that one. Also used on most rally cars, and can be used on just about anything really. They are abundant over here in Europe.
This is GREAT info. I remember the Pro Awesome guys were telling us about an alternative part number for the Porsche Motorsports pump that they used on their Evo and was a fraction of the cost. Thank you for sharing the part numbers!!!
Keep in mind that the pressure hose needs to have an O-ring at the end of it.
I have used the original fitting from the Opel pipe, because those are max 5€ at the wrecking yard and readily available.
It seem that Speedflow 741-06, Earls 961955ERL or 991955ERL will also fit.
I wouldn’t recommend trying to seal it with just a washer.
Is the sensor on the brake cooling duct a map sensor? What is the data used for?
I think its a temperature sensor
Was wondering the exact same thing.
they should go to superlap cota next year
Great article! So much info!
Is there any inherent limitation in using a strut front suspension or can you still get good performance from it? I guess that it performs just fine if Porsche has stuck with it all these years, but strut = economy to me.
The biggest problem is the lack of negative camber gain under compression so it is possible to gain positive camber under roll. However, there are a lot of high-end performance cars that have strut front suspension. It is interesting to note that the 911 GT3RSR has unequal length a-arms in the front now.