Project Budget 400WHP S197 Mustang Track Car: Part 3 – Dyno Testing Borla S-Type Cat-Back Exhaust and Tune

Borla S-Type Exhaust Tips 2014 Mustang GTThe 4.5” Borla exhaust tips are significantly larger than stock and better fill out the rear bumper.  The black chrome finish was definitely the way to go.

Borla S-Type Cat-back 2014 Mustang GTAfter tightening down all of the clamps, the exhaust installation was complete.  The new Borla S-Type Cat-Back Exhaust for 2011-2014 Mustang GTs (Part # 140515BC) took a lot of weight off our S197 and now looks far better from under the car.

Borla S-Type Black Chrome Tips 2014 Mustang GTOn the ground, the 4.5” exhaust tips fill out the rear bumper perfectly, and the black chrome matches the black rear diffuser insert, license plate surround, tail lights and trunk center panel.

Borla 4-inch black chrome exhaust tip 2014 Mustang GTThe exhaust tip location does not look like its sticking that far out from this angle.

Borla Exhaust 2014 Mustang GTOverall, we were very happy with the visual improvement of the Borla exhaust.

Quick Reference:

Page 1 – Stock Exhaust & Borla S-Type
Page 2 – Stock Exhaust Analysis
Page 3 – Crossover Pipe Removal vs Borla
Page 4 – Mid Pipe & Muffler Removal vs Borla
Page 5 – Borla Installation
Page 6 – Borla Installed
Page 7 – Dyno Borla & K&N Airbox Lid On vs Off
Page 8 – Dyno JLT vs K&N Intake. New PBD Tune Dyno
Page 9 – Dyno Overlays: Stock, Tuned Stock Intake Manifold, 2016 Mustang, 2018 Mustang, 2012 Boss 302, Conclusion

14 comments

  1. Really enjoy your perspective on so many things and this build is enjoyable to follow.

    Page three, second paragraph first sentence says intake manifold, but probably meant exhaust manifold.

  2. Very timely article for me, as I’ve been looking at 11-14 GTs as a fair weather DD, and part time track car. My brother has 12 Boss, but a TP/Brembo GT fits my needs and budget. Is there a Part 1 posted somewhere?
    Thanks for posting. Looking forward to Part 4…

  3. I used nothing but Borla Exhaust on all the BDX Mustangs we made from 2007 to 2009. Love it. Trivia, in 1988 my Fox was the mule for the 1st Mustang Borla system. Alex borrowed it and I drove his T-bird for about 2 weeks.

    1. That’s really cool historical fact! I have Borla on my Tundra tow vehicle, nice mellow V8 rumble in Touring spec. And got an S-Type coming for my Turbo 4 Camaro 1LE, which needs an exhaust note desperately.

  4. Really appreciate how methodical and well thought out all your articles are Billy!

    Looking forward to seeing the continued progression of this car. Are you planning to road test the airbox lid comparison as described on Page 7?

  5. Factory exhaust is 409ss not mild steel. Pretty much every factory exhaust since the 90s is 409ss. You will find steel components like flanges and hangers, but piping and mufflers are 409ss. Some later stuff is aluminized coated 409ss like the back half of Mopar exhausts, pickup truck tailpipes, generally anything somewhat visible from the outside of the vehicle.

  6. Long tube headers, albeit expensive, will indeed provide for a substantial increase in RWHP….and RWTQ. You would be up to 450 rwhp with LT’s….and that is a bunch. But that would require either no cats..and an X….or a hi-flow catted X. Then the appropriate mufflers, to tame the noise/any drone. Resonators, just before the rear axle, would also tame noise down, if the mufflers didn’t do the job.

    1. We didn’t want the car to be obnoxiously loud, which long tube headers often do. The car is already borderline with cats and the quietest muffler Borla makes. We are happy with the sound and performance with the current package, meeting our performance goals.

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*