We ditched the factory oil filter pedestal mount for the Raceonly Remote Oil Filter Pedestal. This CNC machined mount is made out of 6061 aluminum and features dual -10AN ORB feed ports (with top and side entry options), dual -8AN ORB side ports, and a 1/8” NPT top sensor port. This pedestal mount is offered in many different anodized colors to suit your design theme.
Raceonly has seen 25-40psi of oil pressure lost across a brand new OEM filter on a 13B and highly recommend replacing this tried and true filter design with a more performance-oriented and efficient remote filter that feeds the engine with more oil pressure, flow, and better filtering.
Bolted to the top of our 13B, the RaceOnly Remote Oil Filter Pedestal looks fantastic, is very compact, and most importantly, allows the relocation of the oil filter.
We installed an oil pressure sensor in the 1/8” NPT top fitting to measure oil pressure after all of the coolers and filters, right before the oil pressurizes the bearings for the most accurate reading possible.
We blocked the top -10AN ORB port and feed the engine via the side port like the factory pedestal. The two -8ORB ports are connected to a -4AN turbo oil feed and a -6AN front iron oil feed.
A custom crimped -6AN nylon braided PTFE hose from BMRS feeds the crucial link between the oil pedestal and the front iron. The factory oil passages are blocked off and oil pressure is isolated to the front and rear iron with no oil traveling through the housings or center iron, which can shift, deflect, and leak. This is a very beneficial oil line routing for high powered builds.
The nylon hose is then tapped into the front iron and directly feeds the front bearing.
We fed the Raceonly Remote Oil Filter Pedestal with the -10AN line from the Improved Racing Remote Oil Filter Mount with Thermostat.
Quick Reference:
Page 1 – Stock FD RX-7 Oil Coolers
Page 2 – Hayden HD Cool 778 Oil Coolers
Page 3 – Oil Cooler Ducting
Page 4 – Improved Racing Remote Engine Oil Filter Mount & Thermostat
Page 5 – How to Make Earl’s Performance Stainless Steel Hose
Page 6 – Oil Plumbing Series vs Parallel & Radium Low Profile Swivel Fittings
Page 7 – Raceonly Billet Remote Oil Filter Pedestal & Front Iron Oiling
Page 8 – Raceonly Billet Oil Filler Neck & Improved Racing Catch Can
Page 9 – Crank Venting from Gutted OMP Port & Turbo Drain Fittings
Page 10 – Raceonly Billet Power Steering Reservoir
11 comments
I don’t think I could park this thing on the street knowing the man hours invested.
Good job. Helluva build.
This has been a great build to follow along. I noticed in the radiator articles you were calling it the BJR radiator. Are there plans for some of these parts to go into production?
I called it the Billy Johnson Racing (BJR) Radiator to give it a name because it was a custom build to my specifications for the FD platform. I’ve sold a few to people who reached out to HQ Engineering and ordered one, but this is a high-end motorsports radiator that’s priced in line with similar 50mm motorsports radiators (>$1,000) that should outperform anything on the market from my research based on its dimensions and efficiency (that fits within stock frame rails). The majority of FD owners are street guys who are use to $400-500 drop-in replacement radiators that are only slightly better than stock. If you need a significant improvement in cooling, you’ll have to spend more than double that wherever you go.
Thank you 🙂 It’s far from over…
Wow, beautifully done!
Out of curiosity why did you go with stainless braided lines over nylon braided? I’ve been choosing nylon braided lines since they’re lighter and easier to work with but I don’t have the experience with A/N lines you do.
I’m a big fan of nylon and use it in many applications, especially for those areas that will not see abrasion or impacts. We chose stainless because it was the only option at the time in the PTFE UltraPro -10AN hose, stainless is generally better protected for mission-critical fluids like oil lines that might see debris impacts, and because this new hose is so flexible and light, there really aren’t any downsides other than maybe a few ounces per foot. This -10AN is very light (37% lighter than traditional rubber w.stainless braid) and is extremely flexible with a 1.772″ minimum bend radius (vs 6.0″ minimum bend radius for the all-rubber Super Stock hose and 4.0″ for the rubber-lined stainless steel braided Auto-Flex hose). The UltraPro and new Ultra Flex 660 Stainless & 650 Kevlar Steel & Pro-Lite 390 Nylon hose are a significant improvement in quality than the impression that you or I might have on thinking of Earls as old-school, old-technology ‘hotrod’ hose vs many high-end motorsports hose brands. I’d bet that once you experience UltraPro & UltraFlex hose first hand, you’ll change your impression on Earl’s, like I did.
Thanks for the info Billy. I’m actually working on an oil cooler and catch can setup for Project EF Civic. I was going to use Earl’s nylon braided line but I will definitely take a look at the UltraFlex lines for the cooler itself. It’s a shame this sort of info isn’t easier to find on their website.
Happy to see that parallel flow oil cooler setup. A bit curious to hear that in prior history, others’ experience with the parallel vs series flow didn’t show dramatic differences in performance. I wonder if that was due to airflow restriction of the factory bumpers. Anyway, the reduction in pressure drop is worth the parallel setup alone. But I expect your setup to do well as you’ve properly accounted for the airflow.
Any particular reason you went with the Radium catch can over the Improved Racing one? Or just personal preference.
Love the update. Love all the blue anodized parts. Love the attention to detail.