Subaru BRZ Archives

Project FR-S, Improving the Aero Balance with Verus Engineering and Victory Function

Posted on June 7, 2022
byMike Kojima

When driving Project FR-S on the track we had noticed that although the car had excellent handling in general, it had understeer in high-speed turns. We also noticed in pictures…

View Post

Prevent Recovery Damage with Raceseng (and Mount Your Go Pro)

Posted on May 12, 2022
byMike Kojima

We have seen cars damaged at races and track days by corner workers and tow truck drivers many times. Often the damage caused by recovering the car is worse than…

View Post

Tech

Rapid Designing and Testing Suspension With 3D Printing Part 2

Posted on April 21, 2019April 24, 2019
byMike Kojima

In our last story, we were redesigning the steering knuckle/upright for the 2019 season on Dai Yoshihara’s Turn 14 Formula Drift BR-Z. Our design goals were to keep the tires…

View Post

Tech

Designing Suspension with 3D Printing

Posted on February 17, 2019February 18, 2019
byMike Kojima

Drift cars with their extreme steering angles are pretty difficult to design suspension for. A lot of things must be considered because geometry that works well on a regular car…

View Post

Dai Yoshihara’s 2018 Formula Drift Rebuild Conclusion

Posted on April 9, 2018July 2, 2018
byMike Kojima

Dai Yoshihara's 2018 Formula Drift Rebuild Conclusion by Mike Kojima So if you have been following along with our mini-series on what an end of season refresh on Pro…

View Post

Dai Yoshihara’s 2018 Formula Drift Rebuild

Posted on February 6, 2018July 2, 2018
byMike Kojima

Dai Yoshihara’s 2018 Formula Drift Rebuild by Mike Kojima After 3 years of Formula Drift competition, our team had pretty much developed the BRZ chassis to where we were satisfied with…

View Post

Project Autocross BRZ: Getting a Little Louder with the ARK Design Racing Spec Exhaust

Posted on August 3, 2016July 2, 2018
byColinHolte

Getting a Little Louder with the ARK Design RacingSPEC Exhaust by Bart Hockerman I have been looking for a good single exit exhaust option since I bought the BRZ. I…

View Post

The Fabulous Flog: A Look Inside Dai Yoshihara’s Falken Tire Subaru BRZ

Posted on September 2, 2014July 3, 2018
byMike Kojima

The Fabulous Flog: A Look Inside Dai Yoshihara's Falken Tire Subaru BRZ by Mike Kojima What is the Flog? It is the nickname that the Falken team has given their…