Project Tundra, Modernizing the Front End and Improving Lighting
Our Tundra has been in service as our shop truck for 14 long years. We have been updating the truck’s looks over the past few years with Morimoto LED headlights…
Posts by tag
Wiring
15 posts
SDHQ Offroads Gen II Heavy Duty Battery Terminals
After shredding our OEM ones during hard off-road driving, we had previously evaluated SDHQ’s heavy-duty battery terminals. The newer terminals were a lot better than the super weak stock parts…
Fixing the GD WRX Fuel System with Radium Engineering and DeatschWerks
On our Project GD STI we upgraded the fuel system using a Radium Engineering fuel hanger and a single large Walbro TIA450 fuel pump. However, we found that Subaru wiring…
Project GD STI, Fixing all the Details!
There are a lot of small details involved with swapping an engine, especially when upgrading all of the system parts for higher performance. These make the difference in the reliability…
Project SC300 Road Racer: Part 34 – Cameras are rolling, copy that.
Life has gotten complicated, and, unfortunately, that has meant that Project SC300 has been sitting around for nearly a year. I reached a point, though, where I couldn’t take it…
Testing SDHQ Offroads Heavy Duty Battery Terminals
So who would have thought that battery terminals are a critical off-road performance part! It did not occur to us and we almost got stranded in the middle of nowhere…
Building the Nissan VQ37VHR part 4, Making the Big Power!
You have probably been following our build of an NA VQ37VHR engine and are probably dying to to see how much power we can get out of it and frankly…
Project Ford E350 Tow Rig: Part 4 – Calling for backup!
Project Ford E350 Tow Rig: Part 4 – Calling for backup! by Erik Jacobs It’s been a minute since we’ve last seen Project E350, but it’s still very much around,…
Project SC300 Road Racer: Part 26 – It’s Getting Hot in Here, so Chillout!
Project SC300 Road Racer: Part 26 – It’s Getting Hot in Here, so Chillout! When we left the SC300 we had the body kit completely installed and then were off…
Getting More Power From the 4G63 With Link Engine Managment
Photography by Vincent Soto Now that we have accumulated all of the cool parts for our Project Evo IX it is time to start getting it all together to integrate…
Project SR E30: Part 7 – Wiring and First Startup!
Hello! Welcome to the 7th installment in our hardheaded adventure of SR swapping a BMW E30. As you may recall, in part 6, we finished up some plumbing and installed…
Monitoring the S2000’s F20C Engine with Autometer!
When we last left our AP1 S2000, we had just installed a Canton Racing Products baffled high capacity oil pan to help assure that our F20C engine would always have a…
BMW E39 M5 Fuel Pump Repair With DeatschWerks
The E39 M5 has a fuel pump that tends to fail at the most inopportune moments, usually with no warning. This fuel pump issue is something that requires particularly closer…
Ultimate SR20 Rebuild Guide: Part 2 – Selecting Your Engine Management
In the last installment we disassembled our SR20 in preparation for machining. Now comes the fun part where we get to pick all the parts for the new build! We’re…
Project SC300 Road Racer: Part 17 – Get out there! Or not…
With the car idling and most of the core sensors configured, we needed to keep moving forward in our electronics configuration in order to get to a point where we…