Project E46 M3, Part 19: Powerflex Bushings and Maintenance


These bushings are going to be really on there so to remove them, line up the Bavarian Autosport tool like so.

On the outside, this big silver piece, which traps the bushing, will go next.

Now simply start tightening the inside nut with your wrench or gear ratchet.  You’ll notice the bushing’s stickiness start to give way, and little by little come on out.

Keep going until the bushing is all the way out.

When the bushing is all the way through, simply disassemble the tool by turning out the long bolt. Everything should come out smoothly.

Leave a Reply

Your email address will not be published. Required fields are marked *