The coilover is a tight fit between the rear drop kunckle, lower control arm, and rear upper control arm.
The coilover is lightly touching the rear upper control arm under full droop, which is not ideal! This will be addressed once we get the car aligned and we shift the position of the arm. At ride height, it clears by about 1/2 inch. This is not a big issue but something to be aware of when you install any coilover.
Howard prepares to install the coilover to the rear knuckle.
Howard tightens everything up!
The rear coilovers are finally in place! Everything is looking great so far.