Building a NASA NP01 Prototype the Right Way with Stoptech! Part 1


The Wilwood pedal box is fitted to the floor. The StopTech crew fabricated and installed a dead pedal at this point. 
The brake resevoirs were installed high for easy serviceability. 
The rear view video monitor is installed as well as the sequential shifter for the transaxle. 
This is one of the two vent fans for the optional cabin blower system. This helps keeps the cabin cool and the windows defogged.  The fans pick up cool air from the nose area of the car.
The pull handle operates reverse for the transaxle and the knob controls the brake bias via adjusting the balance bar between the two brake master cylinders. 
The Motorola VHF radio is for communication between the driver and the pits. 

Leave a Reply

Your email address will not be published. Required fields are marked *