Project DBA R35 GT-R, Building the VR38DETT Engine for Mad Power with MAD Sweden!

We are running MAD Sweden valve covers. Not only do these look awesome but they have improved crankcase breathing with a larger volume and an internal air-oil separator.

We will also be running MAD Swedens breather kit which can handle more blowby and have improved air oil separation over stock.  The black block is actually the oil pump pick-up extension.

That’s some nice CNC work!  Improved crankcase breathing means less oil consumption and better ring seal which can mean more power.

MAD Sweden has what we feel is the best lower pan on the market.  It comes with a baffle and a skid plate as the stock flat bottom belly pan has to be cut to clear it. Even though the pan is lower than stock, it does not dip below the subframe.

The MAD Sweden oil pan gives an additional liter of oil capacity.   This is more than other deep pans on the market.  It is machined out of billet.  As you can see the oil drain port is on the lowest part of the pan so all the dirty oil will come out during changes.

4 comments

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*