,
It’s a little difficult to see in the image above and I failed to get a good picture of the tire to fender fitment on the ground before the car was back in the air for more additions so you’ll have to take my word for it, but the front wheels are quite a bit inboard.
Here’s another angle with the tires mounted.. It was even worse with the car on the ground and the wheels cambered in.We won’t make you wait for the next article where we address the wheel gap to see photos of our wheels, tires and brakes finally together…
(click on image for higher resolution)
Now if only we could get it out of the driveway without ripping off the bodykit!For More Project V8 RX-7 Articles CLICK HERE
Sources
