Project NSX: Part 23 – Carbon 6 Toe Links and Compliance Clamps
We improve the handling and steering response of the NSX with Carbon 6 Composite’s XP Front Tie Rods, Rear Toe Links, and front Compliance Clamps. The NSX has one of…
Posts by tag
nsx
14 posts
Project NSX: Part 21 – Foundry 3 K-Coil Swap
With forced induction on the horizon, we upgrade the spark energy for our C30A engine with the Foundry 3 K-Coil Swap Kit. The Foundry 3 K-Coil Swap Kit is a…
Project NSX: Part 20 – Antigravity Lithium Battery and CTEK Charger
When it comes to weight reduction, it’s difficult to beat the cost-to-benefit ratio of a lithium battery. We replaced our NSX’s heavy AGM battery with Antigravity’s drop-in Group-35/Q85 lithium battery…
Project NSX: Part 19 – Designing a Crank Position Sensor and Knock Control
We design a custom tone ring and hall-effect sensor mount for our Motec M150 to more accurately record the crankshaft position and control ignition timing at high RPM. We also…
Project NSX: Part 18 – DBW Conversion with Motec
We upgrade the ECU in our 30-year-old NSX to the advanced Motec M150, and ditch the throttle cable in favor of a Drive-By-Wire setup to take full advantage of new…
Project NSX: Part 17 – ECU Master PMU16
We replace the NSX’s aging factory main relay and fan control modules with the ECU Master PMU16 Power Management Unit. This also gives us the ability to not only control…
Project NSX: Part 16 – Dry Ice Blasting Restoration
We restore the undercarriage and engine bay of our NSX with Dry Ice Blasting. Now we just might be addicted to Dry Ice Blasting. Once you go ice, nothing is…
Project NSX Part 15 – Upgrading the Interior with Sweidit
We worked with Sweidit to modernize the interior of our NSX with Alcantara and Nappa Leather, replaced plastic trim panels with carbon fiber, and upgrade the head unit and amplifier.…
Project NSX: Part 13 – Track Testing Yokohama A052 Tires and Swift Springs
When it comes to performance on track, tires are one of the most important factors of a car. We install what is arguably the fastest 200-treadwear “Street” tire on the…
Project NSX: Part 12 – NRG Steering Wheel and Quick Release Install
We upgrade one of the most important tools a driver uses: The steering wheel. We install a suede steering wheel, adapter, and quick-release from NRG. NRG has been around for…
Project NSX: Part 10 – AeroWerkZ Paint Correction and Stek PPF Install
To protect our freshly painted NSX, we visited the experts at AeroWerkZ for a full paint correction and wrapped the entire car in Stek’s “DYNOshield” Paint Protection Film (PPF). AeroWerkZ…
Project NSX: Part 9 – Designing, Fitting and Testing a 3D Printed Door Card Frame
We designed and 3D printed a stronger NSX Center Door Frame out of necessity, and solving a much-needed problem. In the tech article Make Your Own Parts with Shareware CAD…
Project NSX: Part 8 – 2002 Facelift and Widebody
Our 1992 NSX gets a make-over with a 2002 facelift conversion and subtle flared fenders from Downforce USA. This will help us fit wider tires in anticipation of more than…
Project NSX: Part 7 – Installing PFC Multi-Pad Monobloc Calipers
Project NSX is back! (Again!) We return by installing arguably the most advanced brakes ever to be fitted on an NSX, in anticipation of more than doubling the stock output…